Application-optimised multipole Combined Lightning Current and Surge Arrester
- Application-optimised and prewired spark-gap-based type 1 + type 2 combined lightning current and surge arrester
- Compact design due to space-saving spark gap technology with a width of only one module / pole
- Fulfils the minimum requirements on the lightning current discharge capacity according to IEC 60364-5-53
- Allows compact lightning equipotential bonding including protection of terminal equipment
- Discharge capacity up to 50 kA (10/350 µs)
- Operating state / fault indication by green / red indicator flag in the inspection window
- High follow current extinguishing capacity (Ifi = 25 kArms)
DEHNshield TNS 255: Application-optimised combined lightning current and surge arrester for TN-S systems
DEHNshield TT 255: Application-optimised combined lightning current and surge arrester for TT and TN-S systems (3+1 configuration)
DEHNshield TN 255: Application-optimised combined lightning current and surge arrester for single-phase TN systems
DEHNshield TT 2P 255: Application-optimised combined lightning current and surge arrester for single-phase TT and TN systems (1+1 configuration)
DEHNshield … FM: With remote signalling contact for monitoring device (floating changeover contact)
Application-optimised DEHNshield combined lightning current and surge arresters combine lightning equipotential bonding up to lightning impulse currents of 50 kA (10/350 µs) and surge protection in a single device.
This clearly distinguishes DEHNshield from varistor-based arresters of this application and performance class.
Due to their technical parameters and the very compact design as spark-gap-based arresters with only one module / pole, DEHNshield arresters are ideally suited for this application class. For this reason, they are a space-saving and application-optimised solution in particular for residential buildings.
DEHNshield arresters also provide optimal protection in existing buildings without an external lightning protection system where roof superstructures or overhead line supplies are installed which require type 1 SPDs according to VdS 2031.
No additional backup fuse is required if an installation is protected by backup fuses up to 160 A.
The energy-coordinated arresters even protect terminal equipment if the distance between DEHNshield and the consumers is ≤ 10 m. The non-exhausting spark gap and the small space requirements of the application-optimised combined lightning current and surge arresters enable easy integration into distribution boards.
The follow-current-limiting spark gap technology ensures selectivity with regard to low-current-rated fuses (35 A gG). This means that upstream fuses will not trip due to mains follow currents.
Busbars and pin-shaped terminals from DEHN can be used for connecting DEHNshield to other DIN rail mounted devices. The type designation of DEHNshield makes it easy to choose the right arrester for the relevant system configuration of the low-voltage consumer’s installation.
The operating state / fault indicator of every protective path does not cause operating currents and instantly shows the operating state of the arrester. Apart from the standard visual indicator with green and red indicator flags, the DEHNshield ... FM versions feature a three-pole remote signalling terminal. As the remote signalling contact is designed as a floating changeover contact, the remote signal can, depending on the circuit concept, be used as a make or break contact.
Due to their parameters and design, DEHNshield devices can even be installed upstream of meter panels in low-voltage consumer installations.