HVI power Conductors
High-voltage-resistant, insulated down conductor for maintaining the separation distance to electrically conductive parts. Can be used for an equivalent separation distance of up to s ≤ 90 cm (in air) or s ≤ 180 cm (solid building material).
Supporting Tube with HVI power Conductor
Optically optimised installation of the HVI power Conductor inside the supporting tube creates reduced area exposed to wind.
Can be used up to an equivalent separation distance s ≤ 90 cm (in air) or s ≤ 180 cm (solid material).
The conductor length has to be stated when ordering (in steps of 0.5 m).
Can be used up to an equivalent separation distance s ≤ 90 cm (in air) or s ≤ 180 cm (solid material).
The conductor length has to be stated when ordering (in steps of 0.5 m).
Air-termination Mast with HVI power Conductor
For a maximum free length of the whole air-termination system of 8.5 m.
To be fixed with three variable supports (Part No. 105 345).
Transport length 6000 mm.
To be fixed with three variable supports (Part No. 105 345).
Transport length 6000 mm.
HVI power Conductor
High-voltage-resistant, insulated down conductor for maintaining the separation distance from conductive parts according to IEC/EN 62305-3.
For use up to an equivalent separation distance s ≤ 90 cm (in air) or s ≤ 180 cm (solid material).
For use up to an equivalent separation distance s ≤ 90 cm (in air) or s ≤ 180 cm (solid material).
Connection Elements for HVI power Conductor / HVI power long Conductor
Supporting Tubes for HVI power Conductor / HVI power long Conductor
Accessories for HVI power Conductor / HVI power long Conductor
Conductor Holders for HVI power Conductor in Ex Areas
The HVI power Conductor is suitable for installation in explosion hazardous areas Ex zone 1 (gases, vapours, mists) as well as Ex zone 21 (dust). The special installation conditions safely prevent electric sparks to neighbouring metal parts when lightning current flows through the HVI power Conductor.
The HVI power Conductor has to be installed in accordance with the installation instructions.
The HVI power Conductor has to be installed in accordance with the installation instructions.
Stripping Tool for HVI power Conductors
Tool for stripping the semi-conductive sheath and the PE insulation of the HVI power Conductor (outer diameter 27 mm)
Handling
Position the cutting head at the end of the conductor and turn clockwise with light pressure to cut / strip it.
The cutting head can be exchanged without tools via the bayonet coupling.
- Tool consists of a of handle and various exchangeable cutting heads
- Stripping length of the HVI power Conductor is adjustable in steps of 0.2 mm (lock points) using the knob. The dial on the handle shows the length set.
Handling
Position the cutting head at the end of the conductor and turn clockwise with light pressure to cut / strip it.
The cutting head can be exchanged without tools via the bayonet coupling.