Attached to round wires or strips to make them conspicuous (as required by DIN 18014) during the construction work.

For wall mounting.
Thrust piece with M8 screw for installing flat strips up to 11 mm and round conductors 6-10 mm.

For connecting down conductors to the earth-termination system.

For connecting down conductors to the earth-termination system; made of corrosion-resistant stainless steel.

For fixing air-termination and earth entry rods, with slotted saddle clamp, fixed conductor routing.
For use with different materials, e.g. Al, StSt, St/tZn and Cu.

Complete unit with flange for installing air-termination and earth entry rods, fixed conductor routing.

Two-screw clamp with M6 screws, with flange (ZDC) and plastic plug Ø10 mm.

Two-in-one holder system (fixes the holder and the conductor), fixed conductor routing.
Only suitable for solid stone or concrete.

For wall mounting with M6 fixing screw, fixed conductor routing.

With insulating piece and disconnetion lug.

For underground installation, for disconnecting the down conductor from the earth-termination system for measuring purposes.

For concrete construction with integrated test joint and special construction markings.

The telescopic test joint box is particularly designed for external thermal insulation composite systems (full thermal insulation).
It is continuously adjustable from 90-140 mm. Thanks to the additional spacer, the test joint box can be used for insulation material thicknesses up to 320 mm.

For flush-mounted test joints.

Test joints, down conductors and connection lugs can be marked using the variable number plate. On site, the individual pre-embossed numbers can be quickly inserted into the plate without additional tools. This ensures uniform marking.

Numbers from 1 to 999 and also certain combinations, such as A01, b02, C03, d04, etc., can be created with the 7-segment number plate and the accompanying paint marker. The special black paint marker has been tried and tested over a long period of time in use with the number plate, is highly opaque, dries quickly, is weatherproof and extremely light-resistant, as well as abrasion-resistant. Other paints or pens cannot be recommended.
The number plate without pre-embossing can be used for on-site marking with punched numbers 10 mm in size.

For attaching the test badge to the down conductor or earth entry.

With M6 thread, for combination with the ""Attention! Equipotential bonding"" sign (Part No. 480 599) or e.g. with number plates.