DEHNpatch
|  DEHNpatch is the first Cat. 6A certified patch cable with built-in surge protection that can be used according to IEEE 802.3at for voltages up to 57 V. |
Details
 GHMT certificate DPA M CAT6 RJ45S 48  GHMT certificate DPA M CAT6 RJ45H 48 | Designed as a patch cable, DEHNpatch is easy to install. It is equally suited for use in new installations or retrofitting into existing installations with little effort. DEHNpatch is simply plugged in between the patch panel and the active component (a switch for example) instead of the conventional patch cable. The snap-in mechanism of the supporting foot allows the device to be safely earthed via the DIN rail. For single applications, delivery includes a piece of DIN rail and fixing material. For multiple applications in 19“ distribution boards, the DEHNpatch mounting set should be used which is available as accessory. DEHNpatch fulfils the requirements of Category 6 and can be universally used for all data services up to nominal voltages of 57 V. It is also well suited for existing services in offices and industrial environments such as Gigabit Ethernet, ATM or ISDN as well as future services such as Voice over IP and Power over Ethernet. Due to its fully shielded design, DEHNpatch can be used in shielded and unshielded networks. Its width is similar to that of an RJ45 socket, allowing up to 24 devices to be installed next to one another in one series and to be integrated into a 19" rack. DEHNpatch with a total patch cable length of 3 m and 5 m is supplied as standard (other lengths available on request). |
Further Models / Accessory:
 DPA M CAT6 |  DEHNpatch Class E |  Accessories |
DPA M CAT6
|  Basic circuit diagram DPA M CAT6 RJ45S 48 |  Dimension drawing DPA M CAT6 RJ45S 48 |
Universal arrester for Industrial Ethernet, Power over Ethernet (PoE+ according to IEEE 802.3at up to 57 V) and similar applications in structured cabling systems according to Cat. 6 and class EA up to 500 MHz. Fully shielded type for DIN rail mounting.
Accessories: Earthing bracket with flat connector sleeve
Accessories: Earthing bracket with flat connector sleeve
- Ideally suited for retrofitting, protection of all lines
- CAT 6A in the channel according to ANSI/TIA/EIA-568
- Power over Ethernet (PoE+ according to IEEE 802.3at)
- For installation in conformity with the lightning protection zones concept at the boundaries from 0B –2 and higher
| Type | ||
|---|---|---|
| Part No. | ||
| SPD class | ||
| Nominal voltage | UN | V |
| Max. continuous operating d.c. voltage | Uc | V |
| Max. continuous operating a.c. voltage | Uc | V |
| Max. continuous d.c. voltage pair-pair (PoE) | Uc | V |
| Nominal current | IL | A |
| C2 Nominal discharge current (8/20 µs) line-line | In | A |
| C2 Nominal discharge current (8/20 µs) line-PG | In | kA |
| C2 Total nominal discharge current (8/20 µs) line-PG | In | kA |
| C2 nominal discharge current (8/20 µs) pair-pair (PoE) | In | A |
| Voltage protection level line-line for In C2 | UP | V |
| Voltage protection level line-PG for In C2 | UP | V |
| Voltage protection level line-line for In C2 (PoE) | UP | V |
| Voltage protection level line-line at 1 kV/µs C3 | UP | V |
| Voltage protection level line-PG at 1 kV/µs C3 | UP | V |
| Voltage protection level pair-pair at 1 kV/µs C3 (PoE) | UP | V |
| Insertion loss at 250 MHz | dB | |
| Capacitance line-line | C | |
| Capacitance line-PG | C | |
| Operating temperature range | ||
| Degree of protection | ||
| For mounting on | ||
| Connection (input/output) | ||
| Pinning | ||
| Connecting lead | ||
| Connector | ||
| Earthing via | ||
| Enclosure material | ||
| Colour | ||
| Test standards | ||
| Transmission class according to ISO/IEC 11801 | ||
| Transmission class according to EN 50173-1 | ||
| Transmission class according to ANSI/TIA/EIA-568 | ||
| Approvals | ||
| Accessories | ||
| Amount | ||
| Options |
| DPA M CAT6 RJ45S 48 | DPA M CAT6 RJ45H 48 |
|---|---|
| 929 100 | 929 110 |
| T | T |
| 48 | 48 |
| 48 | 48 |
| 34 | 34 |
| 57 | 57 |
| 1 | 1 |
| 150 | 150 |
| 2.5 | 2.5 |
| 10 | 10 |
| 150 | 150 |
| ≤ 190 | ≤ 190 |
| ≤ 600 | ≤ 600 |
| ≤ 600 | ≤ 600 |
| ≤ 145 | ≤ 145 |
| ≤ 500 | ≤ 500 |
| ≤ 600 | ≤ 600 |
| ≤ 2 | ≤ 3 |
| ≤ 165 pF | ≤ 250 pF |
| ≤ 255 pF | ≤ 400 pF |
| -20°C ...+60°C | -20°C ...+60°C |
| IP 20 | IP 20 |
| 35 mm DIN rails acc. to EN 60715 | 35 mm DINs rail acc. to EN 60715 |
| RJ45 connecting lead / RJ45 connecting lead | RJ45 connecting lead / RJ45 connecting lead |
| 1/2, 3/6, 4/5, 7/8 | 1/2, 3/6, 4/5, 7/8 |
| A = approx. 0.5 m, G = approx. 3 m *) | A = approx. 1 m, G = approx. 5 m *) |
| Stewart 39 series | Hirose TM 21P |
| 35 mm DIN rail acc. to EN 60715 | 35 mm DIN rail acc. to EN 60715 |
| zinc die casting | zinc die casting |
| bare surface | bare surface |
| IEC 61643-21 / EN 61643-21 | IEC 61643-21 / EN 61643-21 |
| Cat. 6 | Cat. 6 |
| Class EA | Class EA |
| cat. 6A in the channel | cat. 6A in the channel |
| GHMT, GOST | GHMT, GOST |
| fixing material | fixing material |
pc(s)  | pc(s) |
| Further Information | Further Information |
DEHNpatch Class E
|  Basic circuit diagram DPA CLE |  Dimension drawing DPA CLE |
Universal arrester ideally suited for Industrial Ethernet, Power over Ethernet (PoE+ acc. to IEEE 802.3at up to 57 V) and similar applications in structured cabling systems according to class E up to 250 MHz. Protection of all pairs by means of powerful gas discharge tubes and one adapter filter matrix per pair. Fully shielded adapter with sockets for DIN rail mounting.
Accessories: Earthing bracket with flat connector sleeve
Accessories: Earthing bracket with flat connector sleeve
- Ideally suited for retrofitting, protection of all lines
- Cat. 6 in the channel (class E)
- Power over Ethernet (PoE+ according to IEEE 802.3at)
- For installation in conformity with the lightning protection zones concept at the boundaries from 0B –2 and higher
| Type | ||
|---|---|---|
| Part No. | ||
| SPD class | ||
| Nominal voltage | UN | V |
| Max. continuous operating d.c. voltage | Uc | V |
| Max. continuous operating a.c. voltage | Uc | V |
| Max. continuous d.c. voltage pair-pair (PoE) | Uc | V |
| Nominal current | IL | A |
| C2 Nominal discharge current (8/20 µs) line-line | In | A |
| C2 Nominal discharge current (8/20 µs) line-PG | In | kA |
| C2 Total nominal discharge current (8/20 µs) line-PG | In | kA |
| C2 nominal discharge current (8/20 µs) pair-pair (PoE) | In | A |
| Voltage protection level line-line for In C2 | UP | V |
| Voltage protection level line-PG for In C2 | UP | V |
| Voltage protection level line-line for In C2 (PoE) | UP | V |
| Voltage protection level line-line at 1 kV/µs C3 | UP | V |
| Voltage protection level line-PG at 1 kV/µs C3 | UP | V |
| Voltage protection level pair-pair at 1 kV/µs C3 (PoE) | UP | V |
| Insertion loss at 250 MHz | dB | |
| Capacitance line-line | C | |
| Capacitance line-PG | C | |
| Operating temperature range | ||
| Degree of protection | ||
| For mounting on | ||
| Connection (input/output) | ||
| Pinning | ||
| Earthing via | ||
| Enclosure material | ||
| Colour | ||
| Test standards | ||
| Approvals | ||
| Accessories | ||
| Amount | ||
| Options |
| DPA M CLE RJ45B 48 |
|---|
| 929 121 |
| T |
| 48 |
| 48 |
| 34 |
| 57 |
| 1 |
| 150 |
| 2.5 |
| 10 |
| 150 |
| ≤ 190 |
| ≤ 600 |
| ≤ 600 |
| ≤ 180 |
| ≤ 500 |
| ≤ 600 |
| ≤ 3 |
| ≤ 30 pF |
| ≤ 25 pF |
| -40°C ...+80°C |
| IP 10 |
| 35 mm DIN rails acc. to EN 60715 |
| RJ45 socket / RJ45 socket |
| 1/2, 3/6, 4/5, 7/8 |
| 35 mm DIN rail acc. to EN 60715 |
| zinc die casting |
| bare surface |
| IEC 61643-21 / EN 61643-21 |
| CSA, UL, GOST |
| fixing material |
pc(s) |
| Further Information |
Accessories
Mounting set for DEHNpatch
 |
|  |